This is a type of mineral polymer dry mix mortar that applied in thin layer base coat (coarse) bond Top coat (fine) and used instead of traditional gypsum.
Technical Specifications:
- Prevention of corrosion because of inhibition system in contacr with steel components in building.
- Applicable for applying on 3D panel instead of concrete shotting
- Compatible for machine working MIN 120 m^2 a day
- Strong adhesion with all type of sub base ( concrete, 3D panel polystyrene, brick &...)
- Energy saving (Kv=1.069w/c)
- Stable in wet condition (water absorption =9.6%)
- Low density (D=1060 kg/m^3)
- High mechanical and scratch strength (compressive strength= 100 kg/cm^2 & tensile=25 kg/cm^2)
- Crack resistance
- High workability (initial setting time 70 min)
- Crack resistance and elastic behavior
- Consumption: 12kg/m^2 with 1cm of thickness
- The secondary setting time is low, so that after 4 hours of the implementation of the first layer (COARSE), the final layer (Finishing Latex Plaster), which is a completely polished and transparent surface and resistant to moisture, is implemented.
